PF Setting Form

The window switches to Excel screen and shows PF Setting worksheet.

User can look into the contents of Excel output file for the rod.

When you close Excel, the screen returns to the original PF Setting panel of DynaRod.

Example of PF Setting form:

Part 1: Basic Rod specifications

Part 2: Dimensions list

Part 3: Rough PF setting

Part 4: Final PF setting

Part 5: Rod Parts Arrangement

Rod Parts Arrangement is printed in the following manner according to the source data;

	Deflection/Stress: Always printed.
	Design by Deflection: Printed if this function is performed right after [Design by Deflection] is executed.
	Design by Stress: Printed if this function is performed right after [Design by Stress] is executed.
	Both of [Design by] function generates their parts data into a temporary file. The temporary file is overwritten when another rod is [Designed by]. So [Design by xxx] and this function is processed continuously, Rod Parts Arrangement can be printed. In other cases, it is not printed.

Cutting at: The point at which bamboo blank is to be cut off with slide/sleeve length of ferrules adjusted. This enable user to have the equal length of sections when the rod is completed.

Part 1		PF Setting Information				Date:	2006/1/19
Rod ID:		DK7012
Rod Title:		Dickerson 7012
Comments:
Rod Length:		7ft 0in.	( 84in)	Line#:	DT # 4		Rod Pieces:	2

Part 2		Final	Rough	Actual Measurement			Unit:	inch
Point	Dimension	1/2Dimension	Dimension	Flat 1	Flat 2	Flat 3	Average
0	0.061	0.021	0.100					Variance
1	0.064	0.022	0.103
5	0.076	0.028	0.115
10	0.090	0.035	0.129
15	0.105	0.042	0.144
20	0.120	0.050	0.159
25	0.134	0.057	0.173
30	0.149	0.065	0.188
35	0.160	0.070	0.199
40	0.171	0.076	0.210
45	0.195	0.087	0.234
50	0.202	0.091	0.241
55	0.212	0.096	0.251
60	0.228	0.104	0.267
65	0.241	0.111	0.280
70	0.261	0.121	0.300
75	0.302	0.141	0.341
80	0.302	0.141	0.341
84	0.302	0.141	0.341
Note: Rough dimension is added .039 inch to final dimension.
Note: 1/2 Dimension is added -.009 inch to 1/2 of final dimension.

Part 3
PF Setting for (Rough Planing)
	Section 1		Section 2
PF Station	Rod Pt	PFsetting	Rod Pt	PFsetting
0
1	0	0.050	40	0.105
2	5	0.058	45	0.117
3	10	0.065	50	0.121
4	15	0.072	55	0.126
5	20	0.080	60	0.134
6	25	0.087	65	0.140
7	30	0.094	70	0.150
8	35	0.100	75	0.171
9	40	0.105	80	0.171
10	45	0.117	84	0.171
11

Part 4
PF Setting for (Final Planing)
	Section 1		Section 2
PF Station	Rod Pt	PFsetting	Rod Pt	PFsetting
0
1	0	0.021	40	0.076
2	5	0.028	45	0.088
3	10	0.035	50	0.091
4	15	0.043	55	0.096
5	20	0.050	60	0.104
6	25	0.057	65	0.111
7	30	0.065	70	0.121
8	35	0.070	75	0.141
9	40	0.076	80	0.141
10	45	0.088	84	0.141
11
cutting at	0.000		42.730
	42.730		84.000

Part 5
Rod Parts and Arrangement							Unit:	inch,ounce
No.	Item	Suffix	Type	Size#	Location	Weight	Length	Length(inch)
1	Section	1	Even				42.730	42.730
1	Section	2	Even				41.270	41.270
2	Line	1	To Fish	DT 4		0.416	480.000	480.000
2	Line	2	on Rod	DT 4		0.013
3	Top Guide	1		4		0.014
4	Ferrule	1	Standard	12/64	42.730	0.225	2.080	2.080
5	Snake	1		3/0	5.119	0.003
5	Snake	2		3/0	10.751	0.003
5	Snake	3		2/0	16.945	0.004
5	Snake	4		2/0	23.759	0.004
5	Snake	5		1/0	31.255	0.005
5	Snake	6		1/0	39.500	0.005
5	Snake	7		1	48.569	0.006
5	Str.Guide	8		S9	58.545	0.044
6	Grip	1			73.957	0.459	6.500	6.500
7	ReelSeat	1	dnlock		80.457	0.741	3.543	3.543
8	Reel/line	1			82.622	6.116	0.000	0.000